How to Jack Up a Camaro: Tips and Tricks for a Smooth and Safe Lift

If you’re looking to work on your Camaro’s underside, you’re going to need to jack it up. This can be a tricky process, especially if you’re new to it, don’t worry. We have come up with a detailed guide about how to jack up a Camaro.

How to Jack Up a Camaro

We have covered step by step guide for you. Just follow the step below –

Safety First – Preparing to Jack Up Your Camaro

Before you start jacking up your Camaro, there are a few things you need to do to ensure your safety. Here are some steps you should take:

Gather the Right Equipment

You’ll need a few things to jack up your Camaro safely. Here’s what you’ll need:

  • A hydraulic jack that’s rated for your Camaro’s weight
  • A set of jack stands that can hold your Camaro’s weight
  • Wheel chocks to prevent the car from rolling
  • Gloves to protect your hands

Safety Precaution

Before jack up your Camaro, you should take some safety precautions. These are –

Find a Flat Surface: To safely jack up your Camaro, you’ll need to find a flat surface. Ideally, you should work on a concrete or asphalt surface that’s level and firm. Avoid gravel or dirt surfaces, as they can shift and cause your car to tip.

Secure the Car: Before you jack up your Camaro, you’ll need to make sure it’s secure. Here’s what you should do:

  • Apply the parking brake.
  • Place wheel chocks behind the wheels that aren’t being lifted.
  • Put the car in gear (or park, if it’s an automatic).

Step by Step Guide to Lifting Your Camaro

Now that you’re ready to lift your Camaro, here’s what you need to do:

Position the Jack: Place the jack under the jacking point. The jacking point is typically located near the front or rear wheel. Refer to your Camaro’s owner’s manual for the specific location.

Lift the Car: Using the jack handle, pump the jack until the car starts to lift. Keep an eye on the car to ensure its lifting evenly. If it’s not, adjust the jack as needed.

Place the Jack Stands: Once the car is lifted, it’s time to place the jack stands. Place the stands under the designated jacking points (usually located near the front or rear wheels) and slowly lower the car onto them.

Double-Check the Stands: Once the car is resting on the jack stands, double-check to make sure they’re secure. Give the car a gentle shake to ensure it’s stable.

Lowering Your Camaro: When you’re ready to lower your Camaro, here’s what you need to do:

Remove the Jack Stands: Using the jack handle, raise the car slightly and remove the jack stands. Make sure to do this slowly and carefully.

Lower the Car: Using the jack handle, slowly lower the car until it’s resting on the ground. Make sure to do this evenly and watch for any movement.

Remove the Jack: Once the car is on the ground, remove the jack from under the car.

Frequently Asked Questions

Here are some FAQs about jacking up your Camaro –

Q: Can I use a regular car jack to lift my Camaro?

A: No, you need a hydraulic jack that’s rated for your Camaro’s weight.

Q: Can I use cinder blocks as jack stands?

A: No, you should only use jack stands that are rated for your Camaro’s weight.

Q: Can I jack up my Camaro on a sloped surface?

A: No, you should only jack up your Camaro on a flat and level surface to prevent it from tipping.

Q: Can I work under my Camaro while it’s jacked up?

A: It’s not recommended to work under your Camaro while it’s jacked up unless you’re using additional support, such as a creeper or ramps.

Q: How do I know if my jack stands are secure?

A: Double-check the jack stands by giving the car a gentle shake. If it’s stable, the jack stands are secure.

Q: Can I use the same process to jack up other types of cars?

A: While the process is similar, you should always refer to the owner’s manual or manufacturer’s recommendations for the specific make and model.

Q: What should I do if my Camaro doesn’t lift evenly?

A: Adjust the jack until the car lifts evenly. If you can’t get it to lift evenly, do not proceed with lifting the car and seek professional assistance.


Jacking up your Camaro can be intimidating, but if you know how to jack up a Camaro and use right equipment, it can be done safely and effectively. Always prioritize safety and follow the manufacturer’s recommendations for your specific make and model. By taking the time to lift your Camaro correctly, you’ll be able to work on it with confidence and avoid any unnecessary accidents.

Leave a Comment